Mailing List Info
Slackware Logo

News

Security Advisories

FAQ

Book

General Info

Get Slack

Install Help

Configuration

Packages

ChangeLogs

Propaganda

Ports

Other Sites

Support

Contact

Mailing Lists
  Archives

About

 
From: Slackware Security Team <security@slackware.com>
To: slackware-security@slackware.com
Subject: [slackware-security] Slackware 14.2 kernel (SSA:2019-226-01)
Date: Tue, 13 Aug 2019 23:12:49 -0700 (PDT)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

[slackware-security]  Slackware 14.2 kernel (SSA:2019-226-01)

New kernel packages are available for Slackware 14.2 to fix security issues.


Here are the details from the Slackware 14.2 ChangeLog:
+--------------------------+
patches/packages/linux-4.4.189/*:  Upgraded.
  These updates fix various bugs and many security issues, and include the
  Spectre v1 SWAPGS mitigations.
  Be sure to upgrade your initrd after upgrading the kernel packages.
  If you use lilo to boot your machine, be sure lilo.conf points to the correct
  kernel and initrd and run lilo as root to update the bootloader.
  If you use elilo to boot your machine, you should run eliloconfig to copy the
  kernel and initrd to the EFI System Partition.
  For more information, see:
    Fixed in 4.4.187:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-13631
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-18509
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-14283
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-10207
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-14284
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-13648
    Fixed in 4.4.189:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-20856
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-1125
  (* Security fix *)
+--------------------------+


Where to find the new packages:
+-----------------------------+

Thanks to the friendly folks at the OSU Open Source Lab
(http://osuosl.org) for donating FTP and rsync hosting
to the Slackware project!  :-)

Also see the "Get Slack" section on http://slackware.com for
additional mirror sites near you.

Updated packages for Slackware 14.2:
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-firmware-20190726_dff98c6-noarch-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-generic-4.4.189-i586-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-generic-smp-4.4.189_smp-i686-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-headers-4.4.189_smp-x86-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-huge-4.4.189-i586-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-huge-smp-4.4.189_smp-i686-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-modules-4.4.189-i586-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-modules-smp-4.4.189_smp-i686-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware-14.2/patches/packages/linux-4.4.189/kernel-source-4.4.189_smp-noarch-1.txz

Updated packages for Slackware x86_64 14.2:
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.189/kernel-firmware-20190726_dff98c6-noarch-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.189/kernel-generic-4.4.189-x86_64-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.189/kernel-headers-4.4.189-x86-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.189/kernel-huge-4.4.189-x86_64-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.189/kernel-modules-4.4.189-x86_64-1.txz
ftp://ftp.slackware.com/pub/slackware/slackware64-14.2/patches/packages/linux-4.4.189/kernel-source-4.4.189-noarch-1.txz


MD5 signatures:
+-------------+

Slackware 14.2 packages:
31f6e1d8a355504e76fc99e8fb1c97ca  kernel-firmware-20190726_dff98c6-noarch-1.txz
7c529a98b035edec5ecb0395a2d8bc24  kernel-generic-4.4.189-i586-1.txz
ac9c4751a60b630bf4540016705bd469  kernel-generic-smp-4.4.189_smp-i686-1.txz
0f569b5620f8ab97181d2ce2e1d203f8  kernel-headers-4.4.189_smp-x86-1.txz
91f344ae583a173e93a86d5afbcae1bd  kernel-huge-4.4.189-i586-1.txz
35791ce64e121ae3888228cb7fefe38e  kernel-huge-smp-4.4.189_smp-i686-1.txz
a6ad8b6ac14d4b747401c326f7fdb2f0  kernel-modules-4.4.189-i586-1.txz
ebbfec5eac47f25b9348f98378caca8d  kernel-modules-smp-4.4.189_smp-i686-1.txz
31a4099fd16ad86d8e7bcadcfeb97891  kernel-source-4.4.189_smp-noarch-1.txz

Slackware x86_64 14.2 packages:
31f6e1d8a355504e76fc99e8fb1c97ca  kernel-firmware-20190726_dff98c6-noarch-1.txz
f054f970f61cd2d18173c40a688a28e6  kernel-generic-4.4.189-x86_64-1.txz
a6be95eff1a19ca4f3793aacfc53fa9b  kernel-headers-4.4.189-x86-1.txz
760b9736c42324841607dbc744d1fcf2  kernel-huge-4.4.189-x86_64-1.txz
38b6a31e28669e0be03a39662ec8ccc6  kernel-modules-4.4.189-x86_64-1.txz
0ee2ec8dfaddc44f6c4969f5051906e7  kernel-source-4.4.189-noarch-1.txz


Installation instructions:
+------------------------+

Upgrade the packages as root:
# upgradepkg kernel-*.txz

If you are using an initrd, you'll need to rebuild it.

For a 32-bit SMP machine, use this command (substitute the appropriate
kernel version if you are not running Slackware 14.2):
# /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.189-smp | bash

For a 64-bit machine, or a 32-bit uniprocessor machine, use this command
(substitute the appropriate kernel version if you are not running
Slackware 14.2):
# /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.189 | bash

Please note that "uniprocessor" has to do with the kernel you are running,
not with the CPU. Most systems should run the SMP kernel (if they can)
regardless of the number of cores the CPU has. If you aren't sure which
kernel you are running, run "uname -a". If you see SMP there, you are
running the SMP kernel and should use the 4.4.189-smp version when running
mkinitrd_command_generator. Note that this is only for 32-bit -- 64-bit
systems should always use 4.4.189 as the version.

If you are using lilo or elilo to boot the machine, you'll need to ensure
that the machine is properly prepared before rebooting.

If using LILO:
By default, lilo.conf contains an image= line that references a symlink
that always points to the correct kernel. No editing should be required
unless your machine uses a custom lilo.conf. If that is the case, be sure
that the image= line references the correct kernel file.  Either way,
you'll need to run "lilo" as root to reinstall the boot loader.

If using elilo:
Ensure that the /boot/vmlinuz symlink is pointing to the kernel you wish
to use, and then run eliloconfig to update the EFI System Partition.


+-----+

Slackware Linux Security Team
http://slackware.com/gpg-key
security@slackware.com

+------------------------------------------------------------------------+
| To leave the slackware-security mailing list:                          |
+------------------------------------------------------------------------+
| Send an email to majordomo@slackware.com with this text in the body of |
| the email message:                                                     |
|                                                                        |
|   unsubscribe slackware-security                                       |
|                                                                        |
| You will get a confirmation message back containing instructions to    |
| complete the process.  Please do not reply to this email address.      |
+------------------------------------------------------------------------+
-----BEGIN PGP SIGNATURE-----

iEYEARECAAYFAl1Tnp0ACgkQakRjwEAQIjP/LgCggfxKrAO+fTA/F8XgD3Wr9AJ2
/CIAnR3d++ARR2rQhF6GkQcfpUHIA+PO
=0OK1
-----END PGP SIGNATURE-----

Slackware™ is a trademark of Patrick Volkerding.