#!/bin/sh

# Copyright 2006, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

## build glibc-$VERSION for Slackware, including 32-bit compatibility libraries

# Extended to build 32-bit compatibility libraries on x86_64,
# by Fred Emmott <mail@fredemmott.co.uk>. No copyright claim.
# Simplified to produce combined packages (no separate compat-32),
# by Eric Hameleers <alien@slackware.com>


VERSION=${VERSION:-2.11.1}
CHECKOUT=${CHECKOUT:-""}
BUILD=${BUILD:-5alien_slack13.1}

## Included in glibc now:
## glibc-libidn version
#LIBIDNVER=2.10.1

# $ARCH may be preset, otherwise i486 compatibility with i686 binary
# structuring is the Slackware default, since this is what gcc-3.2+
# requires for binary compatibility with previous releases.
if [ -z "$ARCH" ]; then
  case "$( uname -m )" in
    i?86) export ARCH=i486 ;;
    arm*) export ARCH=arm ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
       *) export ARCH=$( uname -m ) ;;
  esac
fi

CVSVER=${VERSION}${CHECKOUT}

# If we bootstrap the multilib glibc with a non-multilib version installed,
# we need to do some things differently:
if echo "$*" | grep -wq -- "--bootstrap" ; then
  echo "**"
  echo "** Bootstrap build"
  echo "**"
  BOOTSTRP=1
else
  BOOTSTRP=0
fi

# NOTE!!!  glibc needs to be built against the sanitized kernel headers,
# which will be installed under /usr/include by the kernel-headers package.
# Be sure the correct version of the headers package is installed BEFORE
# building glibc!

CWD=$(pwd)
# Temporary build location.  This should not be a directory
# path a non-root user could create later...
TMP=${TMP:-/glibc-tmp-$(mcookie)}
mkdir -p $TMP

NUMJOBS=${NUMJOBS:--j4}

# Sanity check on the version number in the install scripts:
if ! grep -vq libutil-${VERSION}.so $CWD/doinst.sh-glibc ; then
  echo "FATAL:  doinst.sh scripts have wrong version numbers."
  exit 1
fi

case $ARCH in
  x86_64)
    TARGET=${TARGET:-x86_64}
    TARGET32=${TARGET32:-i486}
    ;;
  i486)
    # This should be i486 for all 32-bit x86 arch:
    TARGET=${TARGET:-i486}
    ;;
esac

# This function fixes a doinst.sh file for x86_64.
# With thanks to Fred Emmott.
fix_doinst() {
  if [ "x$LIBDIRSUFFIX" = "x" ]; then
    return;
  fi;

  cp -a install/doinst.sh install/doinst32.sh
  # Fix "( cd usr/lib ;" occurrences
  sed -i "s#lib ;#lib${LIBDIRSUFFIX} ;#" install/doinst.sh
  # Fix "lib/" occurrences
  sed -i "s#lib/#lib${LIBDIRSUFFIX}/#g" install/doinst.sh
  # Fix "( cd lib" occurrences
  sed -i "s#( cd lib\$#( cd lib${LIBDIRSUFFIX}#" install/doinst.sh

  if [ "$ARCH" = "x86_64" ]; then
    sed -i 's#ld-linux.so.2#ld-linux-x86-64.so.2#' install/doinst.sh
  fi

  echo "# Add 32bit library links:"  >> install/doinst.sh
  cat install/doinst32.sh | grep -e '^( cd lib ' -e '^( cd usr/lib ' \
    >> install/doinst.sh
  rm -f install/doinst32.sh
}

# This is a patch function to put all glibc patches in the build script
# up near the top.
apply_patches() {
  # Use old-style locale directories rather than a single (and strangely
  # formatted) /usr/lib/locale/locale-archive file:
  zcat $CWD/glibc.locale.no-archive.diff.gz | patch -p1 --verbose || exit 1
  # The is_IS locale is causing a strange error about the "echn" command
  # not existing.  This patch reverts is_IS to the version shipped in
  # glibc-2.5:
  zcat $CWD/is_IS.diff.gz | patch -p1 --verbose || exit 1
  # Fix NIS netgroups:
  zcat $CWD/glibc.nis-netgroups.diff.gz | patch -p1 --verbose || exit 1
  # Support ru_RU.CP1251 locale:
  zcat $CWD/glibc.ru_RU.CP1251.diff.gz | patch -p1 --verbose || exit 1
  # Fix missing MAX macro in getcwd.c:
  zcat $CWD/glibc.getcwd.max.macro.diff.gz | patch -p1 --verbose || exit 1
  # Fix resolver problem with glibc-2.9:
  zcat $CWD/glibc-2.10-dns-no-gethostbyname4.diff.gz | patch -p0 --verbose || exit 1
  # This reverts a patch that was made to glibc to fix "namespace leakage",
  # which seems to cause some build failures (e.g. with conntrack):
  zcat $CWD/glibc.revert.to.fix.build.breakages.diff.gz | patch -p1 --verbose || exit 1
  # This fixes a security issue in glibc 2.12.1 and earlier:
  zcat $CWD/glibc.CVE-2010-3847.diff.gz | patch -p1 --verbose || exit 1
  # This fixes a security issue in glibc 2.12.1 and earlier:
  zcat $CWD/glibc.CVE-2010-3856.diff.gz | patch -p1 --verbose || exit 1
  if [ $BOOTSTRP -eq 1 ] ; then
    # Multilib - Disable check for forced unwind (Patch from eglibc) since we
    # do not have a multilib glibc yet to link to;
    zcat $CWD/glibc.pthread-disable-forced-unwind-check.diff.gz | patch -p1 --verbose || exit 1
  fi
  # Update the timezone information.
  ( cd timezone
    tar xzf $CWD/tzdata?????.tar.gz
    chown root:root *
    mv yearistype.sh yearistype
    chmod 644 *
    chmod 755 yearistype
    mkdir tzcode
    cd tzcode
    tar xzf $CWD/tzcode?????.tar.gz
    chown -R root:root .
    chmod 644 *
    cp -a *.c *.h ..
  )
}

# I'll break this out as an option for fun  :-)
case $ARCH  in
  i486)
    OPTIMIZ="-O3 -march=i486 -mtune=i686"
    LIBDIRSUFFIX=""
    ;;
  i586)
    OPTIMIZ="-O3 -march=i586"
    LIBDIRSUFFIX=""
    ;;
  i686)
    OPTIMIZ="-O3 -march=i686"
    LIBDIRSUFFIX=""
    ;;
  athlon)
    OPTIMIZ="-O3 -march=athlon"
    LIBDIRSUFFIX=""
    ;;
  s390)
    OPTIMIZ="-O3"
    LIBDIRSUFFIX=""
    ;;
  x86_64)
    OPTIMIZ="-O3 -fPIC"
    LIBDIRSUFFIX="64"
    ;;
  *)
    OPTIMIZ="-O3"
    LIBDIRSUFFIX=""
    ;;
esac

# This is going to be the initial $DESTDIR:
export PKG=$TMP/package-glibc-incoming-tree
PGLIBC=$TMP/package-glibc
PSOLIBS=$TMP/package-glibc-solibs
PZONE=$TMP/package-glibc-zoneinfo
PI18N=$TMP/package-glibc-i18n
PPROFILE=$TMP/package-glibc-profile
PDEBUG=$TMP/package-glibc-debug

# Empty these locations first:
for dir in $PKG $PGLIBC $PSOLIBS $PZONE $PI18N $PPROFILE $PDEBUG ; do
  if [ -d $dir ]; then
    rm -rf $dir
  fi
  mkdir -p $dir
done
if [ -d $TMP/glibc-$VERSION ]; then
  rm -rf $TMP/glibc-$VERSION
fi

# Create an incoming directory structure for glibc to be built into:
mkdir -p $PKG/lib${LIBDIRSUFFIX}
mkdir -p $PKG/sbin
mkdir -p $PKG/usr/bin
mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}
mkdir -p $PKG/usr/sbin
mkdir -p $PKG/usr/include
mkdir -p $PKG/usr/doc
mkdir -p $PKG/usr/man
mkdir -p $PKG/usr/share
mkdir -p $PKG/var/db/nscd
mkdir -p $PKG/var/run/nscd

# Begin extract/compile:
cd $TMP
rm -rf glibc-$CVSVER
tar xvf $CWD/glibc-$CVSVER.tar.xz \
  || tar xvf $CWD/glibc-$CVSVER.tar.bz2 \
  || tar xvf $CWD/glibc-$CVSVER.tar.gz
cd glibc-$CVSVER
#tar xvf $CWD/glibc-libidn-$LIBIDNVER.tar.?z*
#mv glibc-libidn-$LIBIDNVER libidn

# If we use this script to bootstrap a multilib glibc using a bare
# statically compiled gcc, we need to disable linking to libgcc_eh:
if [ $BOOTSTRP -eq 1 ] ; then
  sed -i -e 's/-lgcc_eh//g' Makeconfig
fi

chown -R root:root .
find . -perm 666 -exec chmod 644 {} \;
find . -perm 664 -exec chmod 644 {} \;
find . -perm 600 -exec chmod 644 {} \;
find . -perm 444 -exec chmod 644 {} \;
find . -perm 400 -exec chmod 644 {} \;
find . -perm 440 -exec chmod 644 {} \;
find . -perm 777 -exec chmod 755 {} \;
find . -perm 775 -exec chmod 755 {} \;
find . -perm 511 -exec chmod 755 {} \;
find . -perm 711 -exec chmod 755 {} \;
find . -perm 555 -exec chmod 755 {} \;

# Clean up leftover CVS directories:
find . -type d -name CVS -exec rm -r {} \; 2> /dev/null

# Apply patches; exit if any fail.
apply_patches
if [ ! $? = 0 ]; then
  exit 1
fi

build_glibc() {
  CFLAGS="-g $OPTIMIZ -I/usr/include" \
  ../configure \
    --prefix=/usr \
    --libdir=/usr/lib${LIBDIRSUFFIX} \
    --enable-kernel=2.6.18 \
    --with-headers=/usr/include \
    --enable-add-ons=libidn,nptl \
    --enable-profile \
    --infodir=/usr/info \
    --mandir=/usr/man \
    --with-tls \
    --with-__thread \
    --without-cvs \
    $TARGET-slackware-linux

    make $NUMJOBS || exit 1
    make install install_root=$PKG || exit 1
    make localedata/install-locales install_root=$PKG || exit 1
}

# Build the 32-bit binaries first,
# so that 64-bit stuff overwrites the 32-bit stuff where appropriate:
if [ "x$LIBDIRSUFFIX" = "x64" ]; then
  echo "BUILDING DAS 32-BiT NPTL GLIBC"
  (
    mkdir build-glibc-compat32-$VERSION
    cd build-glibc-compat32-$VERSION
    export BUILD_ARCH=$TARGET
    export TARGET=$TARGET32
    export LIBDIRSUFFIX=
    export CC="gcc -m32"
    export OPTIMIZ="-O3 -march=i486 -mtune=i686"
    build_glibc
  )
fi

# Make build directory:

mkdir build-glibc-$VERSION
cd build-glibc-$VERSION

echo "BUILDING DAS NPTL GLIBC"
build_glibc

# The prevailing standard seems to be putting unstripped libraries in
# /usr/lib/debug/ and stripping the debugging symbols from all the other
# libraries.
mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/debug
cp -a $PKG/lib${LIBDIRSUFFIX}/l*.so* $PKG/usr/lib${LIBDIRSUFFIX}/debug
cp -a $PKG/usr/lib${LIBDIRSUFFIX}/*.a $PKG/usr/lib${LIBDIRSUFFIX}/debug
# Don't need debug+profile:
( cd $PKG/usr/lib${LIBDIRSUFFIX}/debug ; rm -f *_p.* )
# NOTE:  Is there really a reason for the glibc-debug package?
# If you're debugging glibc, you can also compile it, right?

## COMMENTED OUT:  There's no reason for profile libs to include -g information.
## Put back unstripped profiling libraries:
#mv $PKG/usr/lib${LIBDIRSUFFIX}/debug/*_p.a $PKG/usr/lib${LIBDIRSUFFIX}
# It might be best to put the unstripped and profiling libraries in glibc-debug and glibc-profile.

# I don't think "strip -g" causes the pthread problems.  It's --strip-unneeded that does.
strip -g $PKG/lib${LIBDIRSUFFIX}/l*.so*
strip -g $PKG/usr/lib${LIBDIRSUFFIX}/l*.so*
strip -g $PKG/usr/lib${LIBDIRSUFFIX}/lib*.a

# Back to the sources dir to add some files/docs:
cd $TMP/glibc-$CVSVER

# We'll automatically install the config file for the Name Server Cache Daemon.
# Perhaps this should also have some commented-out startup code in rc.inet2...
mkdir -p $PKG/etc
cat nscd/nscd.conf > $PKG/etc/nscd.conf.new

# Install some scripts to help select a timezone:
mkdir -p $PKG/var/log/setup
cp -a $CWD/timezone-scripts/setup.timeconfig $PKG/var/log/setup
chown root:root $PKG/var/log/setup/setup.timeconfig
chmod 755 $PKG/var/log/setup/setup.timeconfig
mkdir -p $PKG/usr/sbin
cp -a $CWD/timezone-scripts/timeconfig $PKG/usr/sbin
chown root:root $PKG/usr/sbin/timeconfig
chmod 755 $PKG/usr/sbin/timeconfig

## Install docs:
( mkdir -p $PKG/usr/doc/glibc-$VERSION
  cp -a \
    BUGS CONFORMANCE COPYING COPYING.LIB FAQ INSTALL LICENSES NAMESPACE \
    NEWS NOTES PROJECTS README README.libm \
    $PKG/usr/doc/glibc-$VERSION

  # Add the SlackBuild:
  cat $0 > $PKG/usr/doc/glibc-$VERSION/glibc-multilib.SlackBuild
  chmod 644 $PKG/usr/doc/glibc-$VERSION/glibc-multilib.SlackBuild
)

# Don't forget to add the /usr/share/zoneinfo/localtime -> /etc/localtime symlink! :)
if [ ! -r $PKG/usr/share/zoneinfo/localtime ]; then
  ( cd $PKG/usr/share/zoneinfo ; ln -sf /etc/localtime . )
fi

# OK, there are some very old Linux standards that say that any binaries in a /bin or
# /sbin directory (and the directories themselves) should be group bin rather than
# group root, unless a specific group is really needed for some reason.
#
# I can't find any mention of this in more recent standards docs, and always thought
# that it was pretty cosmetic anyway (hey, if there's a reason -- fill me in!), so
# it's possible that this ownership change won't be followed in the near future
# (it's a PITA, and causes many bug reports when the perms change is occasionally
# forgotten).
#
# But, it's hard to get me to break old habits, so we'll continue the tradition here:
#
# No, no we won't.  You know how we love to break traditions.

# Strip most binaries:
( cd $PKG
  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-debug 2> /dev/null
  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
)

# Fix info dir:
rm $PKG/usr/info/dir
gzip -9 $PKG/usr/info/*

# This is junk
rm $PKG/etc/ld.so.cache
( cd $PKG
  find . -name "*.orig" -exec rm {} \;
)

##################################
# OK, time to make some packages #
##################################

# glibc-zoneinfo.  We will start with an easy one to avoid breaking a sweat ;-)
cd $PZONE
# Install some scripts to help select a timezone:
mkdir -p $PZONE/var/log/setup
cp -a $CWD/timezone-scripts/setup.timeconfig $PZONE/var/log/setup
chown root:root $PZONE/var/log/setup/setup.timeconfig
chmod 755 $PZONE/var/log/setup/setup.timeconfig
mkdir -p $PZONE/usr/sbin
cp -a $CWD/timezone-scripts/timeconfig $PZONE/usr/sbin
chown root:root $PZONE/usr/sbin/timeconfig
chmod 755 $PZONE/usr/sbin/timeconfig
mkdir $PZONE/install
cat $CWD/doinst.sh-glibc-zoneinfo > $PZONE/install/doinst.sh
cat $CWD/slack-desc.glibc-zoneinfo > $PZONE/install/slack-desc
mkdir -p $PZONE/usr/share
cd $PZONE/usr/share
cp -a --verbose $PKG/usr/share/zoneinfo .
cd $PZONE
mkdir -p $PZONE/etc
# This is already hard-coded into doinst.sh (like it'll be there anyway ;-):
rm -f etc/localtime
# Wrap it up:
/sbin/makepkg -l y -c n $TMP/glibc-zoneinfo-${VERSION}_multilib-noarch-$BUILD.txz

# glibc-profile:
cd $PPROFILE
mkdir -p usr/lib${LIBDIRSUFFIX}
# Might as well just grab these with 'mv' to simplify things later:
mv $PKG/usr/lib${LIBDIRSUFFIX}/lib*_p.a usr/lib${LIBDIRSUFFIX}
# Profile libs should be stripped.  Use the debug libs to debug...
( cd usr/lib${LIBDIRSUFFIX} ; strip -g *.a )
if [ "x$LIBDIRSUFFIX" = "x64" ]; then
  # Same exercise for the lib dir:
  mkdir -p usr/lib
  mv $PKG/usr/lib/lib*_p.a usr/lib
  ( cd usr/lib ; strip -g *.a )
fi
mkdir install
cp -a $CWD/slack-desc.glibc-profile install/slack-desc
/sbin/makepkg -l y -c n $TMP/glibc-profile-${VERSION}_multilib-$ARCH-$BUILD.txz

# THIS IS NO LONGER PACKAGED (or is it?  might be better to let it be made, and then ship it or not...)
# glibc-debug:
cd $PDEBUG
mkdir -p usr/lib${LIBDIRSUFFIX}
# Might as well just grab these with 'mv' to simplify things later:
mv $PKG/usr/lib${LIBDIRSUFFIX}/debug usr/lib${LIBDIRSUFFIX}
if [ "x$LIBDIRSUFFIX" = "x64" ]; then
  # Same exercise for lib:
  mkdir -p usr/lib
  mv $PKG/usr/lib/debug usr/lib
fi
mkdir install
cp -a $CWD/slack-desc.glibc-debug install/slack-desc
/sbin/makepkg -l y -c n $TMP/glibc-debug-${VERSION}_multilib-$ARCH-$BUILD.txz
## INSTEAD, NUKE THESE LIBS
#rm -rf $PKG/usr/lib${LIBDIRSUFFIX}/debug

# glibc-i18n:
cd $PI18N
mkdir -p usr/lib${LIBDIRSUFFIX}
rm -rf usr/lib${LIBDIRSUFFIX}/locale
cp -a $PKG/usr/lib${LIBDIRSUFFIX}/locale usr/lib${LIBDIRSUFFIX}
if [ "x$LIBDIRSUFFIX" = "x64" ]; then
  # Same exercise for lib:
  mkdir -p usr/lib
  rm -rf usr/lib/locale
  cp -a $PKG/usr/lib/locale usr/lib
fi
mkdir -p usr/share
cp -a $PKG/usr/share/i18n usr/share
cp -a $PKG/usr/share/locale usr/share
mkdir install
cp -a $CWD/slack-desc.glibc-i18n install/slack-desc
/sbin/makepkg -l y -c n $TMP/glibc-i18n-${VERSION}_multilib-$ARCH-$BUILD.txz

# glibc-solibs:
cd $PSOLIBS
mkdir -p etc/profile.d
cp -a $CWD/profile.d/* etc/profile.d
chown -R root:root etc
chmod 755 etc/profile.d/*
mkdir -p lib${LIBDIRSUFFIX}
cp -a $PKG/lib${LIBDIRSUFFIX}/* lib${LIBDIRSUFFIX}
( cd lib${LIBDIRSUFFIX}
  mkdir incoming
  mv *so* incoming
  mv incoming/libSegFault.so .
)
if [ "x$LIBDIRSUFFIX" = "x64" ]; then
  # Same exercise for lib:
  mkdir -p lib
  cp -a $PKG/lib/* lib
fi
mkdir -p usr
cp -a $PKG/usr/bin usr
mv usr/bin/ldd .
rm usr/bin/*
mv ldd usr/bin
mkdir -p usr/lib${LIBDIRSUFFIX}
# The gconv directory has a lot of stuff, but including it here will save some problems.
# Seems standard elsewhere.
cp -a $PKG/usr/lib${LIBDIRSUFFIX}/gconv usr/lib${LIBDIRSUFFIX}
if [ "x$LIBDIRSUFFIX" = "x64" ]; then
  # Same exercise for lib:
  mkdir -p usr/lib
  cp -a $PKG/usr/lib/gconv usr/lib
fi
# Another manpage abandoned by GNU...
#mkdir -p usr/man/man1
#cp -a $PKG/usr/man/man1/ldd.1.gz usr/man/man1
mkdir -p usr/libexec
cp -a $PKG/usr/libexec/pt_chown usr/libexec
# Same usr.bin deal:
cp -a $PKG/sbin .
mv sbin/ldconfig .
rm sbin/*
mv ldconfig sbin
mkdir install
cp -a $CWD/slack-desc.glibc-solibs install/slack-desc
cp -a $CWD/doinst.sh-glibc-solibs install/doinst.sh
fix_doinst
# Ditch links:
find . -type l -exec rm {} \;
# Build the package:
/sbin/makepkg -l y -c n $TMP/glibc-solibs-${VERSION}_multilib-$ARCH-$BUILD.txz

# And finally, the complete "all-in-one" glibc package is created
# from whatever was leftover:
cd $PGLIBC
mv $PKG/* .
mkdir -p etc/profile.d
cp -a $CWD/profile.d/* etc/profile.d
chown -R root:root etc
chmod 755 etc/profile.d/*
# Ditch links (these are in doinst.sh-glibc):
find . -type l -exec rm {} \;
mkdir install
cp -a $CWD/slack-desc.glibc install/slack-desc
cp -a $CWD/doinst.sh-glibc install/doinst.sh
fix_doinst
( cd lib${LIBDIRSUFFIX}
  mkdir incoming
  mv *so* incoming
  mv incoming/libSegFault.so .
)
# Build the package:
/sbin/makepkg -l y -c n $TMP/glibc-${VERSION}_multilib-$ARCH-$BUILD.txz

# Done!
echo
echo "glibc packages built in $TMP!"