#!/bin/sh
# $Id: jack_capture.SlackBuild,v 1.2 2020/10/09 22:12:56 root Exp root $
# Copyright 2020  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# Slackware SlackBuild script 
# ===========================
# By:          Eric Hameleers <alien@slackware.com>
# For:         jack_capture
# Descr:       program for recording soundfiles with jack
# URL:         http://users.notam02.no/~kjetism/
# Build needs: 
# Needs:       jack2, liblo, meterbridge
# Changelog:   
# 0.9.73-1:    26/Jun/2020 by Eric Hameleers <alien@slackware.com>
#              * Initial build.
# 0.9.73-2:    10/oct/2020 by Eric Hameleers <alien@slackware.com>
#              * Add X-DAW category to the desktop file (for liveslak).
# 
# Run 'sh jack_capture.SlackBuild' to build a Slackware package.
# The package (.t?z) and .txt file as well as build logs are created in /tmp .
# Install the package using 'installpkg' or 'upgradepkg --install-new'.
#
# -----------------------------------------------------------------------------

PRGNAM=jack_capture
VERSION=${VERSION:-0.9.73}
BUILD=${BUILD:-2}
NUMJOBS=${NUMJOBS:-" -j$(nproc) "}
TAG=${TAG:-alien}

DOCS="COPYING README *.txt config.sample"

# Where do we look for sources?
SRCDIR=$(cd $(dirname $0); pwd)

# Place to build (TMP) package (PKG) and output (OUTPUT) the program:
TMP=${TMP:-/tmp/build}
PKG=$TMP/package-$PRGNAM
OUTPUT=${OUTPUT:-/tmp}

SOURCE="$SRCDIR/${PRGNAM}-${VERSION}.tar.gz"
SRCURL="http://archive.notam02.no/arkiv/src/${PRGNAM}-${VERSION}.tar.gz"

##
## --- with a little luck, you won't have to edit below this point --- ##
##

# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
  case "$(uname -m)" in
    i?86) ARCH=i586 ;;
    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
    *) ARCH=$(uname -m) ;;
  esac
  export ARCH
fi
# Set CFLAGS/CXXFLAGS and LIBDIRSUFFIX:
case "$ARCH" in
  i?86)      SLKCFLAGS="-O2 -march=${ARCH} -mtune=i686"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  x86_64)    SLKCFLAGS="-O2 -fPIC"
             SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64"
             ;;
  armv7hl)   SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
             SLKLDFLAGS=""; LIBDIRSUFFIX=""
             ;;
  *)         SLKCFLAGS=${SLKCFLAGS:-"-O2"}
             SLKLDFLAGS=${SLKLDFLAGS:-""}; LIBDIRSUFFIX=${LIBDIRSUFFIX:-""}
             ;;
esac

case "$ARCH" in
    arm*)    TARGET=$ARCH-slackware-linux-gnueabi ;;
    *)       TARGET=$ARCH-slackware-linux ;;
esac

# Exit the script on errors:
set -e
trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PRGNAM}.log' ERR
# Catch unitialized variables:
set -u
P1=${1:-1}

# Save old umask and set to 0022:
_UMASK_=$(umask)
umask 0022

# Create working directories:
mkdir -p $OUTPUT          # place for the package to be saved
mkdir -p $TMP/tmp-$PRGNAM # location to build the source
mkdir -p $PKG             # place for the package to be built
rm -rf $PKG/*             # always erase old package's contents
rm -rf $TMP/tmp-$PRGNAM/* # remove the remnants of previous build
rm -rf $OUTPUT/{checkout,configure,make,install,error,makepkg,patch}-$PRGNAM.log
                          # remove old log files

# Source file availability:
if ! [ -f ${SOURCE} ]; then
  echo "Source '$(basename ${SOURCE})' not available yet..."
  # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT
  [ -w "$SRCDIR" ] || SOURCE="$OUTPUT/$(basename $SOURCE)"
  if [ -f ${SOURCE} ]; then echo "Ah, found it!"; continue; fi
  if ! [ "x${SRCURL}" == "x" ]; then
    echo "Will download file to $(dirname $SOURCE)"
    wget --no-check-certificate -nv -T 20 -O "${SOURCE}" "${SRCURL}" || true
    if [ $? -ne 0 -o ! -s "${SOURCE}" ]; then
      echo "Downloading '$(basename ${SOURCE})' failed... aborting the build."
      mv -f "${SOURCE}" "${SOURCE}".FAIL
      exit 1
    fi
  else
    echo "File '$(basename ${SOURCE})' not available... aborting the build."
    exit 1
  fi
fi

if [ "$P1" == "--download" ]; then
  echo "Download complete."
  exit 0
fi

# --- PACKAGE BUILDING ---

echo "++"
echo "|| $PRGNAM-$VERSION"
echo "++"

cd $TMP/tmp-$PRGNAM
echo "Extracting the source archive(s) for $PRGNAM..."
tar -xvf ${SOURCE}
cd ${PRGNAM}-${VERSION}
chown -R root:root .
chmod -R u+w,go+r-w,a+rX-st .

# Use Slackware's compile flags:
sed -i Makefile -e "s/OPTIMIZE=-O3.*/OPTIMIZE=${SLKCFLAGS}/g"

# We place a copy in the docdir:
cp config config.sample

echo Building ...
# The cli program:
make PREFIX=/usr $NUMJOBS 2>&1 | tee $OUTPUT/make-${PRGNAM}.log
make PREFIX=/usr DESTDIR=$PKG install 2>&1 | tee $OUTPUT/install-${PRGNAM}.log
# The gui:
make jack_capture_gui2 PREFIX=/usr $NUMJOBS 2>&1 | tee -a $OUTPUT/make-${PRGNAM}.log
# No longer an installation target in the Makefile:
install -v -m755 jack_capture_gui2 -t $PKG/usr/bin  2>&1 | tee -a $OUTPUT/install-${PRGNAM}.log

# Only allow execution by user in 'audio' group:
chown root:audio $PKG/usr/bin/jack_capture
chmod 0750 $PKG/usr/bin/jack_capture

# Add a desktop menu entry for the GTK+-2 interface
# - note that this GUI is un-maintained and may break in future:
mkdir -p $PKG/usr/share/{applications,pixmaps}
cat <<EOT > $PKG/usr/share/applications/jack_capture_gui2.desktop
[Desktop Entry]
Exec=jack_capture_gui2
Icon=Microphone
Name=Jack Capture
GenericName=Sound Capture Tool
Comment=Record desktop audio into MP3/WAV file
StartupNotify=true
Type=Application
Categories=X-DAW;AudioVideo;Audio;GTK;
EOT

# Add this to the doinst.sh:
mkdir -p $PKG/install
cat <<EOINS >> $PKG/install/doinst.sh
if [ -x /sbin/setcap ]; then
  # Give jack_capture binary realtime capabilities:
  /sbin/setcap cap_ipc_lock,cap_sys_nice=ep usr/bin/jack_capture
fi
# Update the desktop database:
if [ -x usr/bin/update-desktop-database ]; then
  chroot . /usr/bin/update-desktop-database usr/share/applications > /dev/null 2>&1
fi
EOINS

# Add documentation:
mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
cp -a $DOCS $PKG/usr/doc/$PRGNAM-$VERSION || true
cat $SRCDIR/$(basename $0) > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
chown -R root:root $PKG/usr/doc/$PRGNAM-$VERSION
find $PKG/usr/doc -type f -exec chmod 644 {} \;

# Compress the man page(s):
if [ -d $PKG/usr/man ]; then
  find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \;
  for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
fi

# Strip binaries (if any):
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true

# Add a package description:
mkdir -p $PKG/install
cat $SRCDIR/slack-desc > $PKG/install/slack-desc
cat $SRCDIR/slack-required > $PKG/install/slack-required

# Build the package:
cd $PKG
makepkg --linkadd y --chown n $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} 2>&1 | tee $OUTPUT/makepkg-${PRGNAM}.log
cd $OUTPUT
md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz} > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.${PKGTYPE:-txz}.md5
cd -
cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.txt
cat $PKG/install/slack-required > $OUTPUT/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}${TAG}.dep

# Restore the original umask:
umask ${_UMASK_}